background image

Characteristics And Use Of The Product 

 

Powerful / strong wind airflow / stable / safe / energy sufficient etc.

It can be extensively used in WORKSHOPS, WAREHOUSES, GYMNASIUMS, PATIO,

Safety Instructions 

 

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THE PRODUCT. 
WARNING: 

When using electrical appliances, basic precautions should always be followed to

 

reduce the risk of fire, electric shock, and injury to persons, including the following: 
1. Before using the fan, check that the supplied voltage corresponds to the one shown on the

appliance nameplate.

2. Yellow  and  green  lines  of  the  power  cable  are  used  to  connect  a  power  line  and  they

should be handled only by a qualified person.

3. Make sure the fan is completely assembled before operation.

 
4. Before the fan is turned ON, please ensure the following:

The blades have not been deformed
The blades do not touch the fan cover
The cover is in the right position and has not been deformed.
The screw nut is not loose.

5. The  apparatus  shall  not  be  exposed  to  dripping  or  splashing  and  no  objects  filled  with

liquids,  such  as  vases,  shall  be  placed on  the  product. When operating the fan  outdoors,
use an extension cord suitable for outdoor use to prevent the risk of electric shock.

6. Do not allow children to play with parts of the packaging, such as plastic bags.

 
7. The fan should be placed away from heat sources, such as radiators, gas/electric heaters

and direct sunlight.

8. The  fan  should  not  be  used  in  the  immediate  vicinity  of  water,  such  as  bathtubs,

bathrooms, swimming pools etc.

9. Always place the fan on a stable, level surface when operating, to avoid overturning. Place

the power cord away from walking paths to avoid being tripped over. The cable should be
kept away from heat, sharp edges and oil.

10. Do  not  move  the  fan  while  in  operation.  Disconnect  the  fan  and  wait  until  the  blades

completely stop.

11. Ensure that the fan is disconnected from the supply mains before removing the guard.

 
12. This  product  cannot  be  used  in  explosive  or  dusty  environments,  or  places  with  air  and

steam.

13. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or

similarly qualified persons in order to avoid a hazard.

14. This  appliance  can  be  used  by  children  aged  from  8  years  and  above  and  persons  with

reduced  physical,  sensory  or  mental  capabilities  or  lack  of  experience  and  knowledge  if
they have been given supervision or instruction concerning use of the appliance in a safe
way  and  understand  the  hazards  involved.  Children  shall  not  play  with  the  appliance.
Cleaning and user maintenance shall not be made by children without supervision.

15. Children  of  less  than  3  years  should  be  kept  away  unless  continuously  supervised.

Children  aged  from  3  years  and  less  than  8  years  shall  only  switch  on/off  the  appliance
provided that  it has been placed or installed in  its intended normal operating position and
they have been given supervision or instruction concerning use of the appliance in a safe
way  and  understand  the  hazards  involved.  Children  aged  from  3  years  and  less  than  8
years shall not plug in, regulate and clean the appliance or perform user maintenance.

16. Use  this  fan  as  described  in  the  manual.  Any  other  use,  not  recommended  by  the

manufacturer,  may  cause  fire,  electric  shock,  or  injury  to  persons  and  may  void  the
warranty

Содержание UIF-963








Отзывы: