Note:
When setting temperature, it will use SMART working way:
1)Setting temperature – ambient temperature>2
℃
, working with high power;
2)0
℃
<Setting temperature – ambient temperature=<2
℃
, working with low power;
3)Setting temperature – ambient temperature=0
℃
, the cool fan will work for 30minutes to
below out the heating left inside, then enter into standby mode.
4)after enter into standby mode, if the machine cool down and:
Setting temperature – ambient temperature>=2
℃
, the machine will wake up and resume to
heating.
If you want to cancel the setting temperature, press " " key to choose the heating
or
, the product will work without setting temperature. While the display "
℃
" will go
off, and will show “--”. After continuous heating for 12hours, the cool fan will work for
30seconds and enter into standby mode.
Set weekly program (ONLY by remote control)
After complete setting of current TIME/DAY, below is the steps to set weekly program:
1) Press ”
“, the product enter into working status.
2)Press “
“,the display shows ”P“, it enters into weekly program setting: See below:A
3).Press” “,the display shows d1~d7, set to working day (Monday-Sunday: d1~d7). Such
as set Monday, see below:B
4).Press” “, the display shows P1~P6 (for each day, it can be set maximum 6 time
periods).Such as setting P1, see below:C
5).Press” “,the display shows 00” as default. Press” “ continuously to set the turn-on
time. Such as set the turn-on time 7:00am (Memo: the setting time 0-24 for choice) See
below D
6).Press” “,the display shows the pervious step turn-on time by default. Press
” “ continuously to set the turn-off time. Such as set the shutdown time at 13:00pm (See
below E). (Note: turn-off time later than turn-on time, when turn-on time same as turn-off
time, the unit in stand by mode)
7) .Press” / “ to setting the desired temperature (Temperature range 10-49
℃
),
8) Repeat steps 2-7 above, you can set the whole weekly program (each day, the work of
each segment opens, the time of shutdown).
9) After above setting, press “ “ choose the unit turn-on day of the week, then press
“ “ to choose the turn-on time of the day, then Press ” / “ to set desired temperature
(temperature range 10-49
℃
), press ” “ to confirm the setting.
10) To cancel the weekly function, press the " " again, the light "P" will go off. The
weekly program is off. The product will revert to the previous function working status.
A B C D E
