Note: If not setting the temperature and weekly program, the product will automatically
turn-off after 12 hours of continuous work, and enter into standby.
Function operation (ONLY by remote control)
Note: During the operation of the remote control, remote control transmitter must aim at
remote control receiving area of product, avoid remote control ineffective.
1. Press ”
“, the product enter into working status. See below : A
2. Press ” “ button for one time, the product works with low heating and display shows“--
/
” See below :B. Press again, changes to high heating and display shows“
”.See
below :C
A B C
3.The timer of remote control operate as same as the timer button on unit body.
4.Set current TIME/DAY (can set both under standby mode & working status):
Press ” ”button for one time, the display shows ”12“ as default, press“ / “ to set
current hour (total in 24hours); press “ “ again, the display shows minute “ 30“, press”
/ “ to set current minute (00~59 minutes) ,then press “ “ for third time, the display
shows the day “ d7 ”, press “ / “ to set current day (Monday-Sunday: d1-d7) . Then
press ” “ to confirm the setting, the display will show previous settings.
For example: Setting to Wednesday, 9:30 AM under II heating, pls. refer to the following
photos:
Note:
- Press” “ to check the current time & day in turn;
5.Set temperature
During working status, press“ / “,the display shows ”23“ as default. Press
” / “ to set desired temperature (temperature range 10-49
℃
), press” “ to confirm
the setting.
For example
：
The current ambient temperature is 15
℃
, when set temperature to 25
℃
,
the display shows as below:
