UNITED UFG-60300, Инструкции по эксплуатации и монтажу

Страница: 65 / 68

MAINTENANCE
Change of Oven Lamp
At first plug the oven off from electric supply and make sure that oven is cool. Remove the bulb
after removing the cover in front of lamp. Assemble the new bulb resistant to 300 C to the place of the
bulb that you removed (230 V, 25 Watt, Type E14). Place the lamp protective glass. Your oven will be
ready for use after this process.
Other Controls
Periodically check the gas connection pipe. Even if any simple abnormality is felt, inform the technical
service to have it changed. We recommend the gas connection parts to be changed once a year. If any
abnormality is felt while operating the control knobs of cooker and oven, contact to the authorized service.
BASIC TROUBLESHOOTING BEFORE CONTACTING SERVICE
If the oven does not operate
The oven may be plugged off, there has been a black out. On models fitted with a timer, time may not
be regulated.
If the oven does not heat ;
The heat may be not adjusted with oven's heater control switch.
If the interior lighting lamp does not light ;
The electricity must be controlled. It must be controlled whether the lamps are defective. If they
are defective, you can change them as following the guide.
Cooking (If lower-upper part does not cook equally) ;
Check the shelf locations, cooking period and heat values according to the manual.
Except these, if you still have any problem with your product, please call to the. Authorized Service
INFORMATION RELATED TO TRANSPORT
If you need any transport ; keep the original case of product and carry it with its original case when
needed to be carried. Follow the transport signs on case. Tape the cooker on upper parts, caps and
crowns and pan supports to the cooking panels. Place a paper between the upper cover and cooking
panel, cover the upper cover, then tape it to the side surfaces of oven. Tape cardboard or paper onto
the front cover on interior glass of oven as it will be suitable to the traysi, for the wire grill and trays in
your oven not to damage to the oven's cover during transport. Also tape the oven'scovers to the side
walls.
If it does not have the original case, prepeare a carriage box so that the appliance, especially
external surfaces (glass and painted surfaces) of oven is protected against external forces.
23