Check that the seals between the appliance and the gas container are in
place and in good condition before connecting the gas container.
DO NOT use this appliance if it has damaged or worn seals.
DO NOT use this appliance if it is leaking, damaged or does not operate
properly
TO START
Inserting the gas cartridge
1. Turn the ignition knob to OFF and set the cartridge lever
to UNLOCK. (Fig 1)
Note: if the ignition knob is ON the gas cartridge cannot be
loaded into the cooker.
2. Open the cartridge cover: slide the gas cartridge, top
end first and with its notch up, into the compartment. Align
the notch with the loading guide in the compartment. (Fig 2)
3. Push the cartridge lock down to LOCK in one firm
motion (Fig 3)
WARNING!
THE OPENINGS AT THE BASE OF THE BURNER PROVIDE AIR FOR
COMBUSTION, SHOULD NEVER BE OBSTRUCTED. IF THE FLAME
BECOMES SIGNIFICANTLY ORANGE CHECK THESE OPENINGS
FOR A BLOCKAGE.
IF THE APPLIANCE CANNOT BE ADJUSTED TO PERFORM
CORRECTLY IT SHOULD NOT BE USED UNTIL SERVICED OR
REPAIRED.
