UNITED CPC1500, Руководство по эксплуатации и техническому обслуживанию

Страница: 8 / 39

United Surface Solutions | 11901 Burke St, Santa Fe Springs, CA 90670 | info@unitedusa.com | (877) 837-4623 Page | 8
3.0 Operation
3.1 Applying Power
Before applying power, ensure that the electrical control box is closed
and secure, and that there are no obvious exposed electrical
conductors.
To apply power to the CPC1500, switch on the safety disconnect
switch (supplied/ installed by the customer) to the ON position. The
touchscreen will display the boot screen and the LED power indicator
located on the black frame of the touch screen face will be illuminate.
3.2 Main Menu
After boot is complete, the Main Menu shows with buttons for Auto
Operation, Manual Operation, System Tools, and System Help.
WARNING: The Touch Screen is built to NEMA 4 standards and is
resistant to water but can be easily damaged by sharp hard objects.
DO NOT use any such objects to operate the touchscreen.
3.3 Auto Operation
3.3.1 Entering a New Process
After selecting AUTO OPERATION from the Main Menu, the Process
List screen will appear. To create a new process, choose an empty cell
(if all cells are full, press 11-20 to view the second screen, > to view
the third) then press REVIEW. The Enter Password screen will appear.
To enter a password, press the empty password field
then begin typing the password that was either set by United Surface
Solutions or changed by you (details on changing passwords will be
in a later section of the manual). After typing the password, press ENT
then. If successful, the screen will display PASSWORD CORRECT above
the password field. If this is displayed, proceed by pressing
CONTINUE. To correct any mistakes, press BS (backspace) and
continue typing.