United Technologies MobileView 9000 Series, Руководство пользователя

Страница: 31 / 56

alarm events, the Primary stream is for normal recording, and the Alternate
stream can be used for live viewing over cellular or for low-bandwidth archival.
3. You can customize the following parameters for the selected main stream or
sub-stream:
Video Type
Select the stream type to video stream, or video & audio composite stream.
The audio signal will be recorded only when the
Video Type is Video &
Audio . (Audio only available on MVC-9100)
Resolution
Select the resolution of the video output.
Bitrate Type
Select the bitrate type to constant or variable.
Video Quality
When bitrate type is selected as Variable , 6 levels of video quality are
selectable.
Frame Rate
Set the frame rate to 1/16~30 fps. The frame rate is to describe the
frequency at which the video stream is updated and it is measured by
frames per second (fps). A higher frame rate is advantageous when there is
movement in the video stream, as it maintains image quality throughout.
Max. Bitrate
Set the max. bitrate to 64-6144 Kbps. The higher value corresponds to
better video quality, but higher bandwidth and storage space is required.
Video Encoding If the Stream Type is set to Alarm or Primary stream, H.264 is selectable; if
the stream type is set to Alternate stream, H.264, and MJPEG are
selectable.
The supported video encoding may differ according to the platform.
Profile
Select the profile from the drop-down menu.
I Frame Interval
Set the I-Frame interval to 1~400.
SVC
Scalable Video Coding is an extension of the H.264/AVC standard. Set it
OFF or ON according to your actual needs.
4. Click Save to save the settings.
Configuring Audio Settings (Only available on MVC-9100)
1. Enter the Audio Settings interface
Configuration> Basic Configuration > Video / Audio > Audio
Or Configuration > Advanced Configuration > Video / Audio > Audio
Figure 29: Audio Settings
MobileView 9000 & 9100 Series Analog/IP Camera User Manual 29