© 2021 United States Stove Company
7
ASSEMBLY INSTRUCTIONS
WARNING!
ALWAYS DISCONNECT THE PLUG FROM THE
POWER OUTLET BEFORE REMOVING THE POWER
HEAD FROM CONTAINER.
REMOVING AND CLEANING THE FILTER
1. Verify that the power cord is disconnected from the
outlet.
2. Remove the power head lid and position upside down.
3. Unlock and remove the filter screen from the lock-
clamps by turning counter-clockwise.
4. Carefully remove the cartridge filter.
5. Clean the cartridge filter by gently tapping or brushing
dirt off.
6. Carefully remove the pre-filter from over the tank and
clean the ash or dirt from the filter by gently tapping
or brushing the ash or dirt off.
IMPORTANT!
CLEANING SHOULD NOT BE DONE INDOORS.
DISPOSE OF ASH AND DIRT IN A NON-
COMBUSTIBLE RECEPTACLE. FOR OPTIMAL
PERFORMANCE, A NEW FILTER IS RECOMMENDED.
FILTER INSTALLATION
1. Place the cartridge filter onto the vacuum power
head and push in until it stops flush against the
power head.
