T8-S / T8-X Initial Confi guration
12
Entering The T8 Topside’s Con
fi
guration Menu
Once you’ve gone over the code chart and have chosen the options
you want to set for each code, follow these instructions for entering the
programming mode and setting the options. There is a time-out delay, so
taking longer then 10 seconds between steps will cause the topside to
time-out and resume normal operation.
Step 1
Press and the display will read:
Step 2
Press & Hold for ~15 seconds, until
the display will reads:
Step 3
Then press to see the
fi
rst code:
While in the Con
fi
guration Mode
Press to change the selected Option of the displayed Code
Press to cycle to the next Code
Or press
at any time to save any changes and
exit the Con
fi
guration Menu
Code 1 - Option 1
