SYSTEM
ARCHITECTURE
The backside of the Stele Foot also contains the rear panel / controlling I/0 for the display, the integrated PC and the connectors for
an external player. This is shown in the figure below.
The keypad is described in detail in the „OSD Keypad“ section on page 11. There are two HDMI connectors, one in the
INTERNAL
PLAYER
section on the left side of the rear panel and one in the
EXTERNAL PLAYER
section in the middle of the rear panel. The
internal player HDMI connector
(1.)
is an output and is intended for use of a secondary display – e.g. as a control or maintenance
display – but can also be used to connect a second Crystal Screens system to be run by only one CRYSTAL SCREENS integrated PC.
The External Player HDMI connector
(2.)
is an HDMI input (Rev 1.4a) to the T-OLED display. Right next to it are the Touch
(3.)
and
Camera
(4.)
USB-B outputs to connect the IR touch and the optional camera to an external player.
1.
2.
3.
4.
© 2017 united
.screens
GmbH
