OPERATING
THE DISPLAY
TURNING THE SYSTEM ON
1.
Insert the power cord into the Stele and into the power outlet.
2.
Ensure the AC switch is set to “I”
3.
Press the Power button on the remote or on the keypad.
4.
Press the Power button of the internal player (for at least 1 second).
Note:
If no digital input is connected, the display will wait for a few seconds and then switch the display
into Power Saving Mode. The LED indicator turns from green to red. This will occur until a digital input is
established.
TURNING THE SYSTEM OFF
With the power on, press the POWER button on the remote or the power button on the keypad to put the
Crystal Screens in a standby mode.
Note:
This does not switch off the integrated PC! To switch off the integrated PC, use the ON/OFF icon in
the Windows Start menu and shut down the PC. The integrated PC is switched off when the blue LED ring
around the POWER button in the Internal Player area is off.
(4)
To fully turn off the system, turn the power switch to „0“ or unplug the power cord from the wall outlet.
Note:
Do not switch off the system using the power switch if the integrated PC is still running.
CONNECTING AN EXTERNAL PC
Press the Power Button of the external Player
(5)
and connect your external computer/playback device via
the HDMI connector. Connect the touch with an USB-B to USB-A cable. Turn on the OLED via the keypad
or the remote and then start your external computer/playback device.
Note:
If the OLED does not automatically recognize the external input, use the remote SOURCE button or
the keypad DOWN button (use SELECT to confirm) to switch to HDMI input.
OSD KEYPAD LED INDICATOR
The LED indicator light
(6)
is visible next to the power button of the OSD keypad
LED STATUS
OPERATING STATUS
Led Green
Normal
Led Red
Power Saving
Led Off
Power Off
FRONT VS REAR VIEWING
Because each pixel is emitting its own light, the display can be viewed from the back as well as the front.
However, the light emitted toward the rear is much less than that on the front and any image viewed
from behind will be reversed.
GLASS TREATMENT
The front surface of the Display is made of toughened Glass that is installed in front of the OLED panel
and covered with an anti-reflective coating. The toughened Glass provides scratch resistance on the front
of the display only. The back side of the display is susceptible to damage from sharp and/or hard objects
and should be protected accordingly.
2
1
3
4
5
6
© 2017 united
.screens
GmbH
