UNITED OFFICE ULG 350 B1, Инструкция по эксплуатации и правила безопасности

Страница: 10 / 134

GB
│
IE
│ 7 ■ ULG 350 B1
Preparing for hot lamination
♦ Insert the plug of the laminator into a mains power socket .
♦ Switch the appliance on by pushing the On/Off switch
5 to the “ ON ” posi-
tion . The red Power indicator light
2
lights up .
♦ Set the selector switch for hot and cold lamination
6
to “ HOT ” .
♦ Place the pouch thickness switch
4
at the corresponding pouch thickness
(see also chapter Switching levels ) .
NOTICE
► The attainment of the operating temperature is indicated by the glowing
of the green indicator light
Ready
3
. For a more uniform laminating result
we recommend, especially for thinner foils (below 125 Micron), and after
adjustment to a different foil thickness, to first wait an additional 2-3 minutes
before beginning with lamination .
♦ Place the document to be laminated into a laminating pouch of the
appropriate size .
NOTICE
► Ensure that all edges of the document have at least two millimetres of
space to the edges of the laminating pouch, as shown in Fig . 1 .
► Make certain that you use only one pouch for laminating . First flip it up, as
shown in Fig . 2 .
► For further information about the lamination process, please read the
section
Lamination process .
Fig . 1
Fig . 2