ULG 350 B1
GB│IE│NI
│
7
■
Appliance description
Pouch slot for manual pouch insertion
2
Power indicator light (appliance switched on)
3
Ready indicator light (ready for use)
4
Anti-blocking switch and pouch thickness switch
5
On/Off switch (ON/OFF)
6
Selector switch for hot and cold lamination (HOT/COLD)
Pouch ejector slot
Handling and operation
In this chapter you will receive important information about the handling and
operation of the appliance.
Suitable laminating pouches
For hot lamination you can use pouches with a width of up to 230 mm and a
maximum thickness of 125 micron. For cold lamination you can use pouches with
a maximum thickness of 200 microns. Please note that each laminating pouch
may only be used once.
NOTICE
►
For hot lamination, use only laminating pouches that are expressly
intended for hot lamination.
►
For cold lamination, use only laminating pouches that are expressly
intended for cold lamination.
►
Take note that the laminating pouches supplied with the laminator are
intended exclusively for hot lamination.
Switching levels
Selector switch
position
6
Pouch thickness
switch position
4
Laminating pouch
thickness
Hot
80
> 60 - 80
Hot
125
85 - 125
Cold
125
to 200
NOTICE
►
For high-gloss photos, you should select the switch position “125” as well
as the appropriate pouch thickness.
