UNITED OFFICE ULG 300 B1, Руководство по эксплуатации

Страница: 30 / 115

ULG 300 B1
GB
│
IE
│ 27 ■
Anti-blocking function (ABS)
At the start of the lamination process, the pouch may be pulled in at an angle or
jam itself inside the appliance .
♦ Turn the anti-blocking switch
e
to the position ABS . The pouch will no longer
be drawn in .
♦ Remove the pouch and turn the anti-blocking switch
e
back to the desired
pouch thickness .
♦ Re-start the lamination process .
Cutting function
If you want to use the cutting function on the pouch guide rail
1
, take off the
pouch guide rail
1
.
♦ If necessary, fold in the document supports
q
.
♦ Attach the cutting attachment
w
so that it creates a flat surface with the
pouch guide rail
1
. To do this, place the pouch guide rail
1
on a table or
another flat surface .
♦ Push the cutting head
3
as far as the stop (the cutting head
3
can be
pushed to both ends of the cutting rail
2
) .
♦ Flip up the cutting rail
2
up using the rounded handle and position the
documents on the pouch guide rail
1
. Fix the document in place by pushing
the pouch format guide
4
together until it is touching both sides of the
document .
♦ Use the markings on the scale table to align your document precisely .
♦ Flip the cutting rail
2
down so it clicks into place .
♦ Hold the paper firmly in place with one hand .
♦ To cut, press the cutting head
3
downwards with the other hand and push it
over the document in a single movement .
IB_297529_ULG300B1_LB8.indb 27 22.11.17 13:48