UNITED OFFICE ULG 300 B1, Руководство по эксплуатации

Страница: 29 / 115

ULG 300 B1
■ 26 │
GB
│
IE
Lamination process
♦ Lay the laminating pouch on the pouch guide rail
1
. Lay the right or left
edge of the laminating pouch onto the pouch format guide
4
(closed side
to the front) .
♦ Push the pouch format guide
4
together until the desired format is reached .
In this way, you will ensure that the pouch is not pulled in at an angle .
NOTE
► If, despite this, the pouch is pulled in at an angle, use the "Anti-blocking
function", as described in the section
Anti-blocking function (ABS)
.
♦ Now push the laminating pouch slowly into the slot for manual pouch
insertion
5
.
♦ When you have slid the pouch several centimetres into the slot for manual
pouch insertion
5
it will then be pulled in the rest of the way automatically .
Release the pouch as soon as you notice that it is being pulled in automati-
cally .
CAUTION
► Ensure there is at least 45 cm of open space in front of the laminator .
Otherwise, the pouch will not be ejected completely from the laminator
after lamination . This could damage the pouch .
♦ The finished laminated pouch is ejected from the pouch slot
0
of the lami-
nator .
NOTE
► Only after hot laminating: When the finished laminated pouch is
ejected from the pouch slot
0
of the laminator, it is hot and can easily
change its shape . For this reason, let the laminated pouch cool down for a
minute before touching it .
► To improve the lamination result, you can weigh down a still hot laminated
pouch with a book, a file folder or any other heavy, flat object . This will
help ensure a smooth, perfect surface .
♦ If you are finished laminating, set the ON/OFF switch
7
to “OFF” (O) .
♦ Remove the power plug from the mains power socket .
IB_297529_ULG300B1_LB8.indb 26 22.11.17 13:48