background image

- 3 -

Overheating Protection

This appliance is fitted with overheating protection.
Should the motor become too hot due to excessive
loading, the appliance switches itself off automati-
cally. In this case, disconnect the plug from the
mains power socket and wait until the appliance
has cooled down to room temperature. You can
then reconnect the plug to the mains power socket
and continue using the appliance. We recommend
that, after 2 hours continuous use, you allow the ap-
pliance to cool down for about 30 minutes.

5. Safety instructions

• This appliance is not intended for use by individuals

(including children) with restricted physical, physio-
logical or intellectual abilities or deficiences in 
experience and/or knowledge unless they are
supervised by a person responsible for their safety
or receive from this person instruction in how the
appliance is to be used. 

• Children should be supervised to ensure that they

do not play with the appliance.

• Unplug the power cable after every use and be-

fore cleaning, so as to prevent the appliance from
inadvertently switching itself on.

• Check the appliance and all parts for visible 

damages. The safety concept can work only if 
the appliance is in a faultless condition.

• Never perform hot lamination on flammable,

heat-sensitive and/or meltable materials and do
not laminate drawings on temperature-sensitive
paper or material that will undergo changes in
colour or quality when subjected to heat.

• Never laminate valuable or unique documents.

Although the laminator satisfies all predominant
safety norms and standards, errors can never be
completely discounted - as with all electrical ap-
pliances. Errors with the laminator can result in
damage to the document being laminated.

• Do NOT laminate any document which, together

with the laminating pouch, would have a thickness
of more than 1,0 mm. Should you do so, the lami-
nating pouch could cant itself inside the laminating
appliance. This would damage the laminating pouch,
the document being laminated as well as the 
laminator.

• Do not use an extension cable. Place the appliance

where the mains power socket is easily accessible,
so that in the event of an emergency the plug can
be quickly withdrawn.

• Do not use an external timing switch or a separate

remote control system to operate the appliance.

• Place the appliance where the power wall socket

is easily accessible, so that in the event of an
emergency the plug can be quickly withdrawn.

Risk of electrical shock!

• Connect the appliance to a mains power socket

with a mains voltage of 220-240 V ~ 50 Hz.

• Do not take the appliance into use if the power

cable or the plug is damaged.

• Arrange for defective power plugs and/or cables

to be replaced at once by qualified technicians
or our Customer Service Department.

• NEVER immerse the appliance in water. 

Wipe it only with a damp cloth.

• Do not expose the appliance to rain and never

use it in a humid or wet environment.

• Ensure that the power cable never becomes wet

during operation.

• Unplug the appliance immediately after use. 

The appliance is free of electricity only when you
remove the plug from the mains power socket.

• Do not open the housing or attempt to repair the

appliance yourself. Should you do so, device safety
can no longer be assured and the warranty will
become void. 

IB_61862_ULG300A1_LB6  14.01.2011  11:49 Uhr  Seite 3

Содержание A3 LAMINATOR ULG300A1












Отзывы: