Installation, Operation and Maintenance Manual
VariCool EZ-Fit
16
Subject to change without notice.
3D-Intelliclamps
Each section of a single module is furnished with
3D-Intelliclamps to facilitate connection to the adjacent
section These have been installed at the factory during
production and consist of two interlocking halves that mate
and are then bolted together Once tightened, they ensure
perfect alignment of the mating section surfaces
Once adjacent sections have been put into place, use the
included hardware to pull sections together until the curved
surfaces of the 3D-Intelliclamps are completely mated
3D-Intelliclamp
Size
Wrench
Full Turns Required
3/8"
1-3/16"
6
1/2"
1-3/16"
6
5/8"
1-5/8"
7-3/4
3/4"
1-5/8"
7-3/4
7/8"
1-5/8"
8
1-1/8"
2"
8
Table 1 - Resealable Fitting Turns
INFORMATION
If low refrigerant pressure is evident during
the start-up process, check the tightness
of all resealable fittings A fitting that is not
fully open will restrict refrigerant flow
