background image

4

Repair and Maintenance Clause 

•  All United Chargers products do not require routine maintenance however, periodic 

inspections should be conducted to ensure that all parts remain in good working order 
and no damage exists.  

•  Do not attempt to open, disassemble, repair, tamper with, or modify any components of 

the products. Contact United Chargers for any repairs.

•  Read all the instructions before using this product. 
•  Children should not use this device.  
•  Do not put fingers into the EV connector. 
•  Do not touch live electrical parts.    
•  Do not use this product if the flexible power cord or EV cable is ragged, has broken 

insulation, or any other signs of damage. 

•  Do not use this product if the enclosure or the EV connector is broken, cracked, open,  

or shows any other indication of damage. 

•  Improper connection of the equipment grounding conductor can result in a risk of electric 

shock. Check with a licensed electrician if you are in doubt as to whether the product is 
properly connected and grounded. 

Basic precautions should always be followed when using electrical products, including the 
following: 

WARNING:

 This equipment is intended only for charging vehicles 

that do not require ventilation during charging. Please refer to your 
vehicle’s owner’s manual to determine ventilation requirements. 

Содержание GRIZZL-E SMART






























Отзывы: