EN
29/64
!
BATTERY CONNECTION (FOLLOWING)
DC CABLES CONNECTION
•
Make sure that the AC switch is placed on OFF (0 position).
•
Connect DC 12V positive terminals with the red cable, and the negative ones with the black one.
•
Make sure that the tightening torque is respected, between 11.7 and 13 Nm. A bad connection can
cause an overheat and a risk of fire.
•
Your power inverter
must not be used
in the case of a vehicle having the
positive pole connected to the chassis.
•
Use isolated tools in order to avoid putting the battery or the cables in short-
circuit.
•
Use only copper cables.
•
Do not use cables containing aluminium.
•
In order to protect your installation against overcharges that could cause
fire, protect the positive line with a fuse.
ULTRA FAST
FUSE
ON
OFF
REMOTE CONTROL
Содержание UNIPOWER 800.12 PRO
Страница 71: ......
