6
© 2022 Unitech Electronics Co., Ltd. All rights reserved.
Unitech is a registered trademark of Unitech Electronics Co., Ltd.
All product and company names are trademarks, service marks, or registered trademarks of their respective owners
SP320
User’s Manual
1.5 Getting Started
1.5.1 Install the Battery
The battery is not installed in the printer before the product leaves
factory.
1. Remove the protective film of battery contacts.
2. Install the battery as shown in the figure below.
3. Fasten the battery cover.
Note
:
The battery must be fully charged before using it for the first time. After
storing for a long time, the battery also needs to be fully charged before reuse
to achieve the best use effect.
