16
Copyright 2007 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Checking the Main and Backup Battery Status
This section describes how to view the power level for
both the main and backup battery. To minimize power
consumption, you can define settings for the auto-off
function and the processor’s operation speed.
To check the main and backup battery status:
1. Tap
Start → Settings → Control Panel → Power
:
The Power Properties screen appears.
2. The battery menu item displays the status of the
main and backup batteries.
On the screen shown here, the main battery is good,
but the backup battery charge is very low. You should
charge the backup battery as soon as possible in this
case.
NOTE:
It is necessary to charge the battery when
the battery charge reaches below 10%. If the
battery does not accept a charge, contact
unitech Technical Support.
Main battery voltage