Chapter 4
Advanced Settings
40
Copyright 2006 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Performing a Cold Boot
A cold boot cuts off power of your device, erasing all records and entries, deleting all
programs you have added, and restoring the device to default factory settings.
Never perform a hard reset unless a soft reset does not correct your problem. When
you perform your next ActiveSync operation, you can restore any data that you previ-
ously synchronized to your computer or you can restore data that you backed up to a
storage card.
NOTE:
When you perform a hard reset, the date and time settings are not be
retained. Formats, preferences, and other setting are restored to their
default factory settings. Data stored in the flash storage are retained.
Follow these instructions to perform a cold boot.
1. Press and hold the Func key and TAB
key.
2. While holding the Func key and TAB
key, insert the tip of the stylus into the
reset hold on the back of the PA600.
Press and hold the reset button until you
see the unitech splash logo screen.
Wait 5 seconds and then release the
Func key and TAB keys.
NOTE:
The system is returned to the default settings. All registry settings and all
files (include the hidden files) are returned to their original factory
defaults.
