Chapter 1
Getting Started
12
Copyright 2006 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Calibrating the PA600 Screen
The calibrate screen automatically appears when the unit is powered-on for the first
time or after the system is reset.
To calibrate the screen at any time, follow these instructions.
1. Tap
Start
→
Settings
, and then switch to
System
tab.
2. Tap the
Screen
icon.
Or
Press Func key and ESC key simultaneously.
The Screen Settings window appears.
This Window enables you to customize the screen
settings.
3. Tap
Align Screen
to calibrate the screen.
The align screen window appears.
4. Tap the cross hair firmly and accurately.
