Chapter 2
Using the Hardware
Using the MicroSD Memory Card
The PA820 has an expansion slot compatible with a range of MicroSD memory
cards, which are primarily used to back up or transfer files and data.
Inserting a Memory Card
1. Open battery compartment cover and remove the main battery.
2. To release the SIM card cover, slide it to the right and then open it with
thumb. To release the MicroSD card cover, slide it downwards and then
open it with thumb.
3
1
2
3. Insert the MicroSD card into the cover with the notched corner as shown,
and the contact side of the MicroSD card faces down.
4. Close the MicroSD card cover over the slot, and then slide the cover
upwards to lock the MicroSD card. Close the SIM card cover over the slot,
and then slide the cover to the left to lock the SIM card.
5. Re-install the main battery and battery compartment cover.
Removing the Memory Card
1. Open battery compartment cover and remove battery.
2. To release the SIM card cover, slide it to the right and then open it with
thumb. To release the MicroSD card cover, slide it downwards and then
open it with thumb.
3. Remove the MicroSD card from the slot.
- 15 -
Содержание PA820
Страница 19: ...PA820 Product Introduction Accessory Kit PA820 Terminal USB Cable Power Adaptor Plugs Battery Hand Strap 5...
Страница 37: ...23 Scan Available AP 1 Tap Profile to scan available APs 2 Under Profile tab tap Scan for available AP...
Страница 38: ...3 You may select a desired AP to create a new profile Tap Configure 24 4 Tap Yes to create the new profile...
Страница 39: ...5 Enter the WEP key or network key Tap OK 25 Commit and Activate 1 Tap Commit to activate the setting...
