18
Copyright 2009 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Removing a Storage Card
1. Remove the four screws from the SD compartment cover and remove the
cover.
2. Press the card in and release. The card pops out.
3. Remove the card from the slot.
4. Replace the SD compartment cover and the four compartment screws.
Using the 2D Imager
The PA600 has an integrated 2D Imager which reads all major bar code labels with
excellent performance.
NOTE:
Scanning software must be enabled in order to operate the scanner.
This can be a user-loaded application or a pre-loaded utility such as
Scanner Setting or Scan2Key.
Activate the 2D Imager by pressing either one of
the trigger keys located on the left and right side
of the unit.
The PA600 has a built-in Scanner Setting utility
that allows you to test the device’s barcode scan
function.
1. To launch Scanner Settings, tap
Start
→
Settings
→
System
→
Scanner Settings
.
unitech
unitech
Scan button
