![background image](http://html1.mh-extra.com/html/unitec/varilex-1802-ht/varilex-1802-ht_original-instructions-manual_3986106008.webp)
8
www.csunitec.com
Original instructions VARILEX
®
1802 HT
EN
5.10 Reducing dust exposure:
Some of the dust created using this power tool
may contain chemicals known to cause
cancer, allergic reaction, respiratory disease,
birth defects or other reproductive harm.
Some of these substances include: lead (in
paint containing lead), mineral dust (from
bricks, concrete etc.), additives used for wood
treatment (chromate, wood preservatives),
some wood types (such as oak or beech dust),
metals, asbestos.
The risk from exposure to such substances
will depend on how long you or bystanders are
being exposed.
Do not let particles enter the body.
Do the following to reduce exposure to these
substances:
•
Ensure good ventilation of the workplace and
wear appropriate protective equipment, such
as respirators able to filter microscopically
small particles.
•
Observe the relevant guidelines for your
material, staff, application and place of
application (e.g.
occupational health and safety regulations,
disposal).
•
Collect the generated particles at the source,
avoid deposits in the surrounding area.
•
Use suitable accessories for special work
(see
chapter 8.), thus less particles enter the
environment in an uncontrolled manner.
•
Use a suitable extraction unit.
Reduce dust exposure with the following measures:
•
Do not direct the escaping particles and the
exhaust air stream at yourself or nearby
persons or on dust deposits.
•
Use an extraction unit and/or air purifiers.
•
Ensure good ventilation of the workplace and
keep clean using a vacuum cleaner. Sweeping
or blowing stirs up dust.
•
Vacuum or wash protective clothing. Do not
blow, beat or brush.
6. Product features
6.1. Power tool VARILEX
®
1802 HT – see
page 2-3 (figures A1, A2, C1 and D1):
A1-1
Particulate matter protection cap
A1-2 / D1-1 Spindle locking button
A1-3
Safety cover
A1-4
Tool holder
A2-1
Speed adjusting wheel with
electronics signal indicator
A2-2
Handle
A2-3
Additional handle
A2-4
Trigger switch
C1
Lever for safety cover attachment
D1-2
Spindle
D1-3
Support flange
D1-4
Clamping nut
D1-5
Clamping wrench
1-800-700-5919 (US/CA)
www.csunitec.com
+1-203-853-9522 (Intl.)