![background image](http://html1.mh-extra.com/html/unitec/varilex-1802-ht/varilex-1802-ht_original-instructions-manual_3986106004.webp)
4
www.csunitec.com
Original instructions VARILEX
®
1802 HT
EN
1. EC-Declaration of conformity
We declare under our sole responsibility that
the product described under “7. Technical data”,
identified by type and serial number, fulfills all
the relevant provisions of the directives
2011/65/EU (RoHs), 2004/108/EC
(until April 19th 2016), 2014/30/EU (from April
20th 2016), 2006/42/EC and the following
harmonized standards have been used:
EN 60745-1:2009+A11:2010
EN 60745-2-3:2011 +A2:2013+A11:2014
+A12:2014
+A13:2015
EN 55014-1:2006+A1:2009+A2:2011
EN 55014-2:1997+A1:2001+A2:2008
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 50581:2012
Geretsried, 2020-01-15
Gerd Eisenblätter,
CEO Gerd Eisenblätter GmbH
2. Specified conditions of use
The angle grinders are suitable for grinding,
sanding, abrasive cutting-off operations and
wire brushing metal, concrete, stone and similar
materials without the use of water.
Recommendation:
For demanding
polishing work in continuous use we recommend
our angle polishers VARILEX
®
POLISHER HT and
VARILEX
®
POLISHER AKKU.
It is for dry processing only.
The user bears sole responsibility for any
damage caused by inappropriate use.
Generally accepted accident prevention
regulations and the enclosed safety information
must be observed.
3.
Symbols
Warning of general danger
Warning of electric shock
Read the operating manual and
safety instructions
Wear ear protection
Wear protective gloves
Wear a dust mask
Wear protective goggles
Wear sturdy shoes
Do not dispose of it with domestic
waste
Tip, advice
CE marking: Confirms the
conformity of the power tool with
the European Community directives.
2.
Specified conditions of use.......................4
3.
Symbols
....................................................
4
4.
General safety information..........................5
5.
Special safety instructions..........................5
6.
Product features ........................................8
7.
Technical data............................................9
8.
Accessories .............................................10
9.
Initial operation ........................................10
10.
Attaching the tools, working notes . ........ 11
11.
Switching on and off . . . . .. . .................. 12
12.
Troubleshooting ......................................12
13.
Maintenance . .........................................12
14. Repairs . . . . . ................................... . . . 13
15. Environmental protection .
. . .
. . . . . . . . . . . .
13
English
Table of contents
1.
EC-Declaration of conformity . . . . . . .
..
. .
...4
1-800-700-5919 (US/CA)
www.csunitec.com
+1-203-853-9522 (Intl.)