H y d r a u l i c
R o t a r y H a m m e r D r i l l
2 2 4 2 6 0 0 1 0
Translation of the original manual,
compiled: 24.02.17
224260010_BA_en_Version_CSU_00
Page 14 of 18
Service and Maintenance
Basic Safety Instructions:
WARNING – Maintenance and repair work on hydraulic equipment.
Hydraulic can cause severe injury. Observe legal regulations. Take precautions for persons
and environment.
Additionally, observe the following:
Secure the machine against unintentional starting and let the machine cool down to the
ambient temperature
Protection against tipping, tumbling or falling down when assembling/ disassembling the
machine/parts.
CAUTION – Skin exposure to hazardous dusts may cause severe dermatitis. Dust at the
work place can be raised during the maintenance procedure and can be inhaled.
Clean the machine and the work place before maintenance work.
WARNING – Danger of explosion! Generation of sparks during maintenance work!
Consider local safety regulations
.
Avoid use of force when disassembling and assembling
the machine
.
Always do maintenance work outside hazardous medium.
PROHIBITION - Eating, drinking and smoking are forbidden during maintenance and repair
work
NOTICE – Use only original SPITZNAS spare parts, in order to avoid damages.
Otherwise you risk a decrease in machine performance and an increase in maintenance
work. Check the adherence to the technical specifications according to the operation manual
after each maintenance work.
IMPORTANT – There is no warranty for damages and liability is disclaimed, if non-original
spare parts are used.
Maintenance Instruction
Generally, hydraulic machines need little maintenance. If these rules are followed, the machine will have
the expected durability and high reliability. Service life and performance of the machines are decisively
determined by:
The purity degree of the hydraulic oil
The lubrication conditions and maintenance
The regular control of the hydraulic filter/ the hydraulic fluid, as well as the regular checking of
the machine with regards to external damages.
Disassembly and re-assembly of the machine have to be executed by qualified staff only. Incorrect assembly
can lead to danger of accident for the operator and to defects on the machine. Additionally to the measures
described before, it is a must to check the grease in the gear and to fill it up or replace it, if necessary. The
correct quantity of grease (20 g) is very important with regard to good lubrication and low warming.
Grease: SPITZNAS order number 9 9902 0130 (400 g); 9 9902 0250 (100 g)
CS Unitec, Inc.
• Toll-free: 800-700-5919 • Ph: 1-203-853-9522 • Email: [email protected] •
www.csunitec.com
