UNITEC Climate W177, Руководство пользователя

Страница: 10 / 24

10 English
SUNNY PARTLY CLOUDY CLOUDY RAINY STORMY
WEATHER FORECAST & BAROMETRIC PRESSURE
The unit predicts weather condition (G) of the next 12 –
24 hours based on the change of atmospheric pressure
(F). The coverage area is around 30 – 50 km. The wea-
ther forecast is based on atmospheric pressure change
and is about 70-75% correct. As weather conditions
cannot be 100% correctly forecasted, we cannot be re-
sponsible for any loss caused by an incorrect forecast.
The current weather forecast is the one highlighted
by a black-outlined square box.
To obtain an accurate weather forecast (G) &
barometric pressure reading, you need to input
your current altitude. After the reset of the unit, it
will enter altitude setting mode. Press „
 ”
3
or
„  “
4
to set the pressure unit in hPa, mb or inHg.
Press „PRESSURE”
8
to confirm. Then enter your
current altitude in meter or feet. Press „PRESSURE”
to confirm and exit the setting. You can also hold
„PRESSURE”
8
button to enter altitude setting
mode during normal use.
Press „PRESSURE”
8
button to select pressure
unit between hPa, inHg & mb.
Important note:
Different geographical location such as inland area
or coastal region has different weather forecasting
response. In case your weather forecast always
show rainy or stormy over a long period of time and
does not reflect the actual weather condition, it is
necessary to follow below procedure for fine tuning
the weather forecast’s accuracy:
1) Check the current weather condition outdoor
2) Enter altitude setting mode and adjust altitude (F)
accordingly. Increase or decrease altitude setting
by 20m (or 60ft) each time and exit. Repeat this
step until the weather forecast icon matches with
the current outdoor weather condition.
(Eg. If the current outdoor weather is partly
cloudy, increase or decrease altitude setting until
weather forecast icon becomes partly cloudy).
Increase altitude
Decrease altitude
IN/OUT TEMPERATURE & HUMIDITY
Temperature reading (J) is located on the upper left
of the display and humidity (D) is on the right of the
temperature.Press „C/F“

button to select tempera-
ture unit C/F.
Press „CHANNEL/SEARCH”
5
button to select indoor,
Ch1, Ch2, Ch3 and auto-channel scrolling display
modes.
IN/OUT HEAT INDEX
Heat Index combines the effects of heat and humidity.
It is the apparent temperature of how hot the heat-
humidity combination makes it feels.
Press „HEAT INDEX/DEW POINT”
7
button once
to show the respective indoor or outdoor heat index
on the upper left display. “HEAT INDEX” (K) icon will
appear.
HEAT INDEX ALERT INDICATOR
During conditions indicating a high heat index, a Heat
Index Alert Indicator will appear on screen.
Caution
Exercise more fatiguing than usual
Extreme caution Heat cramps, exhaustion possible
Danger Heat exhaustion likely
Extreme danger Heat stroke imminent
IN/OUT DEW POINT
Dew point is the saturation point of the air, or the
temperature to which the air has to be cooled in order
to get condensation.
In normal mode, press „HEAT INDEX / DEW POINT”

button twice to show the respective indoor or outdoor
dew point reading on the upper left display.
„DEW POINT” (K) icon will appear.
313503_Manual_121120.indd 10 20.12.12 09:49