Unitary products group FF-10, Руководство по установке

Страница: 7 / 20

035-18877-001-B-0203
Unitary Products Group 7
CLEARANCES
Refer to the unit dimension details, Figure 15 for clearances
required for servicing and for proper unit operation.
VERTICAL / HORIZONTAL INSTALLATION
The FF-10 unit is shipped for vertical installation with a
vertical air discharge as shown in Figure 2, but may be
converted to other arrangements per the following
instructions:
1. Remove the panels from the blower section.
2. Remove the four Phillips machine bolts that hold
the coil and blower sections together. A bolt is
located near each corner.
3. Move the blower section to the proper location.
4. Attach the blower section to the coil section with
the machine bolts removed in Step 2.
5. Before replacing the panel, see Duct Connection
and Drain Connection.
6.
Replace the panels.
TABLE 3: FF-10 UNIT SUSPENSION WEIGHTS (LBS)
SUSP'N. POINT W/ 2 HP MOTOR W/ HEATER ACCESS W/ PLENUM ACCESS
W/ HEATER & PLENUM
ACCESS
A
95 95 85 85
B
120 120 100 100
C
95 115 165 185
D
115 140 185 205
T
OTAL
W
T
.
425 470 535 575
FIGURE 2: VERTICAL AND HORIZONTAL APPLICATION