Unit USI-286, Руководство пользователя

Страница: 7 / 20

User manual | Руководство пользователя | Iron | Утюг | USI-286/287
7
Cleaning and maintenance.
After use.
1. Disconnect power supply and empty the water left in water tank.
2. Wait for the sole completely cool before you remove the iron.
3. Wipe the iron soft, damp cloth. Do not use solvents to clean the soleplate and
abrasive cleaners.
4. Store the iron in an upright position. Avoid scratching the sole.
Self-clean function.
It is necessary to regularly clean the iron, depending on the water hardness and
intensity of use.
1. Fill water into the water tank and set the temperature selector to Max position
2. Connect the iron to the network. Make sure the steam regulator is set to “Off”.
Warning: Never pour vinegar or other liquid cleaners for eliminating calcium into
water tank!
3. As soon as the iron heats up, and the light indicator goes out, hold the iron over
the sink, press and hold self-cleaning (12). The steam and boiling water will come
out through the holes in the sole of washing away scale and impurities.
4. Release the button self-cleaning as soon as the water in the tank is over.
Auto-decalcification function
Iron equipped system Auto-decalcification (Anti-Calc). Thanks to it, reduces the rate
of scale formation.
Faults-reasons and solutions
Iron emits an odor or smoke
Iron gives off an odor when turned on for the first time. Oils used during
manufacture need to be burnt off allow ten minutes for odor to disappear.