Unit UOR-993, Руководство пользователя, Страница: 9 / 24

Oil radiator | UOR-993
9
Under Low power, Medium power and High power setting, the heater will keep working
controlled by thermal cut-out.
Note: The higher the power is, the quicker the desired temperature will be achieved but the
power consumption will be higher.
Lower power levels are recommended when the heater is being used for an extended
period of time.
Eco mode
Press the Power/Mode button (c), until the “ECO” light turn on. Under Eco mode, the
heating power will adjust automatically when the room temperature is approaching
the setting temperature.
Example:
The setting temperature is 25°C. When the room temperature is less than 22 °C, the
heater will work under High power ( ). When the room temperature rises to
23°C, the heater will change to work under Medium power ( ). When the room
temperature rises to 24 °C, the heater will change to work under Low power ( ).
When the room temperature reaches to the setting temperature 25 °C, the heater
will switch off automatically. And when the room temperature is lower than setting
temperature, the heater will switch on again under Eco mode.
Remark: if no thermostat setting, the default temperature is 23 °C under Eco mode.
Thermostat setting
Only under Eco model can make the thermostat setting.
Temperature setting possible in the range from 10 °C to 30 °C.
1. Press the Power/Mode button (c), until the “ECO” light turn on.
2. Press the thermostat button (a), the temperature digit will blink.
3. Use the “+” and “-” buttons to set the desired temperature.
4. The setting temperature digit will stop blinking and the current room temperature
will appear after the desired temperature is set.
5. The heater will maintain the air temperature in the room by switching on and off
automatically.