Unit UOR-993, Руководство пользователя, Страница: 8 / 24

Oil radiator | UOR-993
8
REMOTE CONTROLS
The remote control requires one CR-2025 – 3V cell (supplied).
Follow the +/- polarity indicated on the remote control.
The remote control must be pointed towards the remote sensor on the control panel.
The remote control can be stored in the slot integrated into the appliance at the rear
cover if not used.
OPERATION OF THE DEVICE
Press the on/off power switch (6) to turn the appliance on. The product is now in
stand-by awaiting a mode to be selected via the
buttons on the appliance or the remote control. The appliance emits a beep sound.
The light on ( ) will turn on.
The following settings can be performed using the touchpad or the remote control. A
beep sound is emitted at every key press.
Press the stand-by button (f) to exit the stand-by mode and begin selection of the
different modes. Heater will start working under low power ( ).
Heating power and Eco mode setting
Press the Power/Mode button(c), it will cycle from default Low power ( ); two clicks
- Medium power ( ); three clicks - High power ( ); four clicks - Eco mode
(ECO).