18
After selecting one of the above options, press the
SET(MODE)
key to resync, and the
display will return to normal mode.
Do not press any buttons
until the synchronization is
complete. The remote search icon
will display constantly for 3 minutes until the
signal is reacquired.
7.5
Reset
Min/Max
record
Note:
If you own more than one thermo-hygrometer sensor, the minimum and
maximum value of all channels will be cleared in the reset mode.
In normal mode, press (do not hold) the
MIN/MAX/-
key
,
the
MAX
icon will be displayed
in date area. Press the
SET/MODE
key to view max values of rainfall (rate, 24h, week or
month) , pressure (ABS or REL),outdoor temperature and humidity((AT or dew
point),indoor temperature and humidity (temp or dew point) and sensor temperature and
humidity, sensor dew point or heat index.
Press the
MIN/MAX/-
key for three seconds to clear all max values.
（
the rainfall, wind
speed, wind gust, pressure, temperature and humidity maximum values. The maximum
values will now display the current values
）
.
Press the
C
button to switch the display between remote thermo-hygrometer
sensors 1 through 8 to view Max values.
Press the
MIN/MAX/-
key again (do not hold), the
MIN
icon will be displayed. Press the
SET/MODE
key to view min values of pressure (ABS or REL), outdoor
temperature/humidity((AT or dew point),indoor temperature/humidity(temp or dew point),
sensor temperature humidity, sensor dew point(dew point or heat index).
Press the
MIN/MAX/-
key for three seconds to clear all min values.(the pressure,
temperature and humidity minimum values. The minimum values will now display the
current values).
Press the
C
button to switch the display between remote thermo-hygrometer
sensors 1 through 8 to view Min values.
Press the
SNOOZE
key to exit the min/max checking and cleaning mode, return to normal
display mode.
7.6 Snooze Mode
If the alarm sounds, and you wish to silence the alarm, press the
SNOOZE
key, the
backlight will turn on. The alarm icon will continue to flash and the alarm will silence for
five minute. press any key (
MIN/MAX/+ ,SET/MODE, ALARM,C
) to
permanently exit the
Snooze
mode.
7.7
Back
light
Mode
If the LED is off, Press the
SNOOZE
button once. The backlight will turn on for five
seconds, and if no operation is performed for three seconds, the backlight will turn off.
The backlight operation is different when operating on batteries to save power.
