620-7900 REV A
STAR TRAC BY UNISEN CONFIDENTIAL AND PROPRIETARY
Page 6 of 8
13-
Affix new heard rate board onto the
inner back of the USB pocket. Place the
board one inch away from lower edge
and parallel to it.
Rectangular coil should be orientated
as shown.
14-
Route new heart rate board cable
through same path of old heart rate
cable:
-
Tuck cable under top fan assembly.
-
Secure top fan assembly using the
screw from step 8.
-
Plug new heart rate cable into
connector J19 on the board.
15-
Slide the Fitlinxx connector back onto
to the base of the plastic cove.
Figure 13: Installing new heart rate board
Figure 14: Routing new heart rate cable
Figure 15: Installing Fitlinxx connector
Board should be
one inch away from
lower edge and
parallel to it
