620-7900 REV A
STAR TRAC BY UNISEN CONFIDENTIAL AND PROPRIETARY
Page 3 of 8
4-
Disconnect all 4 cables coming out of
the neck:
-
The Coax cable
-
Ground wire
-
Power cable
-
Data cable
5-
Now that the display assembly is off,
set it down on a flat table then unscrew
the 4 hex screws that hold the neck to
the display housing using a 3/16 Allen
key. Set the neck aside for future use.
6-
Using a Philips-head screw driver,
remove the 12 screws holding the back
plastic cover of the display in place.
Figure 4: Disconnecting display cables
Figure 5: Removing plastic cover
Figure 6: Removing back cover screws
Remove
screws
Remove
screws
