UNISEM UniTracer L-100, Руководство пользователя, Страница: 19 / 42

www.unisem.co.kr | iot@unisem.co.kr | +82.31.724.2548
If there is input in ‘arg3’, ‘arg3’ is 32bit 16 hexadecimal value.
If there is no input in ‘arg3’, device will read the value of NFC key.
Must enter ‘save’ after registering a NFC key.
If the NFC key value is ‘0’, it recognizes as unregistered status.
If there is no NFC key registered, any NFC can be used for authentication
ex) When registering with NFC card at ‘0’ index
$ set nfc 0
After entering the command, NFC card will be touched on the NFC antenna.
$ save
ex) When registering with NFC key value ‘4f3d1122’ at ‘3’ index
$ set nfc 3 4f3d1122
$ save
ex) Delete the NFC key value at ‘3’ index
$ set nfc 3 0
$ save