Unique UGP 22 DV, Руководство пользователя

Страница: 20 / 48

U N I Q U E U G P - 2 2 D V
16
Gas Operation
“Start Up” Procedure – see Figure # 5 on next page for control panel
1. Locate the control panel below the bottom of the fridge door, behind the
plastic grill, pull off plastic grill to access controls.
2. Turn the gas shut off valve C to the ON position – to the left
3. Turn thermostat button B fully clockwise (Max), start to spark ignitor button A
before depressing the gas control button E , there may be a period of time
required for air to escape from the gas line and flow up to burner. Length of
time will vary depending on distance of the fridge to propane tank. Continue
pushing the igniter button while holding in the gas button until the needle in
the flame indicator
D moves into the green area (to the left). It is important
that you start sparking first before pressing in the gas button, otherwise you
may flood the burner box with gas, if this happens it will not light and you will
have to wait a period of time for the gas to dissipate before starting the
process again.
4. When the needle starts to move into the green area, this means flame is now
lit. Stop sparking and continue to hold gas button E down for an additional 10
seconds. Release gas button, fridge should now stay lit and the needle should
remain in the green area.
5. Once all the above has been done and you are ready to re-start your fridge for
use, leave the thermostat button at “4”. Setting the thermostat to "4" will
allow the fridge to get to optimum cooling temperature. It may be necessary
to adjust the temperature control on the thermostat knob to suit your needs.
6. The quantity of food in the refrigerator, the frequency with which the
refrigerator doors are opened and the room temperature will all affect
refrigerator temperatures.