Unique UGP 22 DV, Руководство пользователя

Страница: 14 / 48

U N I Q U E U G P - 2 2 D V
10
Figure A
•
Now prepare to drill holes in the interior wall for each the fresh air and
flue exhaust tube. Depending on what’s on your outside wall you will have
to make necessary adjustments in the drilling process.
•
Take your adjustable drill bit or similar tool and set it to a diameter of
approx. 2.375” which is the outer diameter of the venting. We suggest you
make it slightly larger to allow for thicker/deeper walls, This will allow for a
little play if you do not have it lined up just right where measurements are
not exact. The extra space can be filled in with silicone afterwards.
•
You now have your holes in the wall. The next step is to take each the
fresh air vent and flue exhaust vent and push them through from the
exterior wall inward. Make sure the long part of the “T” on the flue
exhaust vent, faces down – see below