OPERATION OF RANGE
(continued)
3. Press the knob inward and
hold to activate the electronic
ignition. Note that you will
hear a “clicking” noise. Hold
the knob pressed inward until
the oven burner is lit. Once
the oven burner is lit, release
the knob.
In case of power outage, you can manually light the burner by pressing the knob
inward and immediately approach a lighted match to the opening “A” (see the dia-
gram above).
Never continue this operation for more than 15 seconds. If the
burner has still not ignited, wait for about 1 minute prior to
repeating the ignition.
4. When using the range for the fi rst time or after long period of non-usage, keep
pressing the knob inward for approximately 10 – 15 seconds after the burner has lit
to ensure the gas valve has been accurately primed.
5. Close the oven door slowly and adjust the burner accordingly to the desired
temperature. If the fl ame extinguishes for any reason, the safety valve will auto-
matically shut off the gas supply to the burner.
To re-light the burner, fi rst turn the oven control knob to the OFF position, wait for
at least 1 minute and then repeat the lighting procedure.
Attention: the oven door becomes very hot during operation. Keep
children away.
MOISTURE
IMPORTANT
If sparking does not occur when the oven thermostat knob is turned on during the
initial attempt to use, or after several days of non-use, it COULD BE the result of
moisture build-up in the ceramic sleeve of the oven electrode. This may happen in
areas with high humidity, or if food having high water content is cooked. This mois-
ture can be driven out of the ignitor by lighting the pilot and operating the oven for
a few minutes.
A
33
Содержание PRESTIGE UGP-20V PC1 B
Страница 21: ...21 WALL CLEARANCES continued ...
Страница 46: ...UGP 20V PC1 S S WIRING DIAGRAM 46 ...
Страница 54: ...NOTES 54 ...
Страница 55: ... 2019 Unique Gas Products Ltd 2245 Wyecroft Road 5 Oakville Ontario Canada L6L 5L7 www uniqueoffgrid com ...