Unique LGP 18, Руководство пользователя

Страница: 23 / 48

2.0
WHAT YOU SHOULD DO IF THE ALARM SOUNDS
WARNING
:
Activation of this device indicates the
presence of carbon monoxide (CO) which can KILL YOU. If
alarm sounds:
For Users in the United States, follow the protocol in steps 1
through 4 below:
1
Operate reset/silence button;
2 Call your emergency services (____ - ______) [fire department or 911];
3 Immediately move to fresh air – outdoors or by an open door/window.
Do a head count to check that all persons are accounted for. Do not
reenter the premises nor move away from the open door/window until
the emergency services responders have arrived, the premises have been
aired out, and your alarm remains in its normal condition.
4 After following steps 1-3, if your alarm reactivates within a 24 hour
period, repeat steps 1-3 and call a qualified technician (____ - ______) to
investigate for sources of CO from fuel burning equipment and
appliances, motor vehicles or other sources and inspect for proper
operation of this equipment. If problems are identified during this
inspection, have the equipment serviced immediately. Note any
combustion equipment not inspected by the technician and consult the
manufacturers' instructions or contact the manufacturers directly for
more information about CO safety and this equipment. Make sure that
motor vehicles are not and have not been operating in an attached garage
or adjacent to the residence.
For users in Canada, follow the protocol in steps 1 and 2 below:
1. Immediately move to fresh air – outdoors or by an open door or window.
Check that all persons are accounted for. Do not re-enter the premises or
move away from the open door/window until the emergency services
responders have arrived; the premises have been aired out, and your alarm
remains in its normal condition;
2. Call your emergency services ( ___ - ________ ) [ fire department or 911
]; If “service” signal sounds (RED LED flashes and horn beeps every 30
seconds); contact your retailer the manufacturer for troubleshooting