4
Material needed (purchased separately):
INSTALLATION INSTRUCTIONS/ENCLOSURE REQUIREMENTS
Making sure the top mouinting clips are installed:
• Insert into the slots on top of the dishwasher.
• Fasten with screws.
• Fix clips underneath counter with screws.
X2
Top mounting clips
Enclosure Requirements
• Dishwashers must be installed with a drain hose no longer than 10 feet (3.01 m) to
ensure proper drainage.
• The dishwasher is designed to be enclosed on top and sides by standard domestic
kitchen cabinets.
• The installation enclosure must be clean and free of obstructions.
• Cabinets must be at least 24" wide, 25" deep and 34" high.
(Refer to Fig 2. on pg 5)
• The standard countertop depth measures approximately 25”. The diswasher door will sit
1" proud of the countertop. If you are building a custom kitchen you can size your
countertop using 26" in depth.
(Refer to Fig 1. on pg 5)
90
o
Fitting (3/4").
The other end should be sized
to fit the water supply
Teflon thread
seal tape
Three wire nuts (UL listed)
(two included in kit)
New installations only
not Included in kit
Universal Power Cord
(optional)
Screw-type hose
clamps
Coupler for extending
drain line (if applicable)
Air gap
(if required)
Waste tee for
house plumbing if
applicable
Hand shut-off
valve
Hot water line (min.
3/8 in. copper) kit
Strain relief
(for electrical
connections)
