17
INSTALLING THE DISHWASHER Cont'd
1
Insert the drain hose into the hole in the cabinet wall. If a power cord is used, guide the end
through a separate hole.
1
Position the dishwasher in front of the opening, then slide the dishwasher into the opening a
few inches at a time.
2
Pull the drain hose through the opening under the sink as you proceed. Stop when the
dishwasher is a few inches in front of the adjacent cabinetry.
3
Make sure that the drain hose is not kinked under the dishwasher and that there is no
interference with the water line, wiring, or any other component.
Step 8: Install the drain hose
Step 9: Slide the dishwasher partially into the cabinet
Tip:
Position the water line and house wiring on the floor to avoid interfering with the base of the dishwasher.
Caution:
Do not push against the front panel with your knees. Damage will occur.
Maximum drain hose
length 10ft. (3.01m)
Drain hose
House wiring
Insulation blanket
Do not push against the front
door panel with your knees.
You will damage the front
panel.
Water
line
