Uniq UP-680 Скачать руководство пользователя

Страница: 16 / 18

7. Camera accessories

7.1 Power Supply and Power Cable

12 V DC regulated power supply with 1A current output or better is recommended. This camera

uses Hirose 12-pin connector for power source. The matting cable plug connector can be

purchased through distributors or UNIQ and the Hirose part number is

HR10A10P12S

. UNIQ

provides power supplies and power cables as "one stop shopping" for customers. Alternatively, the

power supplies and power cables can be purchased through power supply and cable vendors.

Contact UNIQ for vendor list.

7.2 Lens

C-mount lens is the standard lens for UP-680/UP-680CL camera. There are a variety of C-mount

lenses in the market that works with UP-680/UP-680CL camera. Make sure the quality and

specification of the lens match the camera's application. Some of the most popular lenses in the

market, such

as Cosmicar, Fujinon, Rodenstock, and Schneider

, are recommended.

7.3 Digital Connector and Cable

7.3.1 40-pin Digital Connector and Cable

UNIQ stocks standard and custom cables for customer's convenience. These are high quality and

flexible twisted paired, overall shielded cables. Contact UNIQ for more details.

The mating cable plug connector and back shell kits are made by

AMP

AMP: 749111-3

cable plug connector with covers.

AMP: 749192-1

back shell kits with latches

7.3.2 Camera Link Cable

Camera Link cable can be purchased from 3M, Mouser, frame grabber vendors or UNIQ.

Содержание UP-680



















Результаты поиска

Содержание UP-680

Отзывы:

Похожие инструкции для UP-680

Бренды по названию

Популярные бренды

Uniq UP-680, Руководство пользователя

Результаты поиска

Содержание UP-680

Отзывы:

Похожие инструкции для UP-680

Бренды по названию

Популярные бренды