Unipulse F371, Руководство по эксплуатации

Страница: 2 / 137

Cautions and Requests for Use
Cautions and Requests for Use
●
Do not disassemble the main body for modifications or repair.
●
Be sure to use crimp contacts for connection to terminal blocks, and do not to
connect bare wires as they are.
●
Be sure to ground the protective ground terminal.
- The main F.G. is indicated by , it must be grounded with the protected
earth.
●
Be sure to disconnect the power cable when performing the following.
- Attachment/detachment of connectors of options.
- Wiring/connection of cables to terminal blocks.
- Connection of the ground line.
●
Be sure to assort the machine which is supplied by AC power through the ter-
minal in a panel with lock or screws.
●
Carefully check wiring, etc. before applying power.
●
Take an interval of more than 5 seconds when repeating ON/OFF.
●
Take adequate shielding measures when using at the following locations.
- Near a power line.
- Where a strong electric field or magnetic field is formed.
- Where static electricity, relay noise or the like is generated.
●
Do not install in the following environments.
- Place
ｓ
exposed to direct sunlight.
- Where the temperature and/or humidity exceeds the range in the
specifications.
- Place
ｓ
containing corrosive gas or flammable gas.
- Place
ｓ
with large quantities of dust, salt or iron powder.
- Where the product may be splashed with water, oil or chemicals.
- Where the main body is directly affected by vibration or shock.
●
Set the correct Excitation Voltage for the sensor.
（
2.5V is set when F371 is
dispatched from us.
）