Basic functions and setup
We have put a lot of experience and effort into making the Display Unit very easy to operate on
the track and in the pit. The feed back we get from drivers and teams using the Unipro Laptimer
tells us that we have succeeded. Here you can get an overview over the functions on the Display
Unit.
DISPLAY BUTTONS
DOWN
Adjust different
values DOWN. Hold
it down to increase
the speed of the
adjustment.
FUNCTION
Change values in
upper display. Entering
setup and service
mode and more.
UP
Adjust different
values UP. Hold it
down to increase the
speed of the
adjustment.
MODE
Press once to turn the
Laptimer on. Hold it
down to turn it off.
Change between
different modes and
clear laps.
Infrared
communication
IrDA
RPM
warning
BASIC SETUP
Go to setup mode, and make sure that the basic settings match your actual setup. You enter
setup mode this way:
1.
Press MODE to turn on the Laptimer
2.
Press and hold FUNC to enter setup mode
3.
Press MODE to browse through the different setup screens
You can read about all the setup screens in the reference manual. Here we will introduce you to
the ones you need to know to get started.
UNIPRO – The original Laptimer
12
