Page 8
DPAC1U SERIES
OPERATING MANUAL
P O W E R I N G T E C H N O L O G Y
Manual No. dpac1u-5
dpac-man-Rev5-0119.indd
option, may repair or replace the non-conforming product or issue credit, provided the
manufacturer’s inspection establishes the existence of a defect. To exercise this remedy, the
buyer must contact the manufacturer’s Customer Service Department to obtain a Return Material
Authorization number and shipping instructions. Products returned without prior authorization
will be returned to buyer. All products returned for repair must be shipped freight prepaid to
UNIPOWER. If the buyer fails to fully comply with the foregoing, the buyer agrees that no other
remedy (including, but not limited to, incidental or consequential damages for lost profits, lost
sales, injury to person or property or any other incidental or consequential losses) shall be
available to the buyer.
6.0
FUNCTIONAL DIAGRAM
A simplified schematic diagram of the AC Distribution Panels is shown in Figure 3.
The diagram represents the A or B side of the panel. The input handles one or two
inverters with up to 25A each. The output goes to as many as four AC circuits with a
circuit breaker on each. The A and B sides can be in common (standard) or isolated
(option). This is determined at the time of ordering.
7.0
SPECIFICATIONS
INPUT / OUTPUT
Configuration ..........................................Single (A) or Dual (A & B) Sections
Current Capacity .............................................. 50A Per Section, 100A Total
No. of Circuit Breakers ............................... 2 to 4 Per Section, Up to 8 Total
Breaker Capacity, Option T ........................................................... 5A to 30A
Option C ........................................................... 5A to 15A
Voltage .............................................................................. 120VAC Nominal
SAFETY STANDARDS
...................... UL1950, CSA22.2 No.950, EN60950
ENVIRONMENTAL
Operating Temp. Range .......................................................... 0°C to +50°C
Storage Temp. Range ......................................................... -40°C to + 85°C
Humidity ......................................................... 0% to 95%, Non-Condensing
PHYSICAL SPECIFICATIONS
Case Material ....................................................................................... Steel
Finish .............................................................................. Powder Coat Gray
Dimensions, Inches (mm) ................................. 1.75 H x 17.13 W x 11.00 D
(44.5 x 435 x 279)
Weight ......................................................................... 10.25 lbs. (4.65 kg.)
Rack Mounting Width .......................................................... 19 or 23 Inches
CONNECTIONS
Input/Output Connections .......................................... Barrier Terminal Strips
Positronics/NEMA 5-15R Receptacle
Chassis Ground Connection .................................................. No. 8-32 Stud
