Page 17
P O W E R I N G T E C H N O L O G Y
Document No. M00035-MAN rev. 3a
aspiro1u_m35-man-rev3a-0417.indd
3.2 Caution
3.2.1 Storage and Transportation
CAUTION
During storage and transportation, the units must remain in their original
packages in order to avoid mechanical damage, maintain tracability, and protect the units
against electrostatic discharge.
3.2.2 Disposal
CAUTION
The product should not be disposed with other wastes at the end of its working
life so as to prevent possible harm to the environment or human health from uncontrolled
waste disposal.
3.2.3 Handling Electrostatic Sensitive Devices
CAUTION
An electrostatic sensitive device is an electronic component that may be
permanently damaged by the discharge of electrostatic charges encountered in routine
handling, testing and transportation.
3.2.4 Traceability
CAUTION
Units are labeled with permanently attached product identification labels.
The labels are designed to be indelible throughout the life span of the equipment, unless
mistreated. Make sure that the product identification labels are present on the equipment
and are not subjected to unusual wear or mistreatment.
3.2.5 Breakers
CAUTION
Breakers should always be replaced with the same type and rating in order to
avoid damage to system components.
3.2.5.1 Circuit Breaker Limitations
1. Limitations for ambient temperature up to 47°C, maximum system output current 45
Amps:
Maximum load per circuit breakers rated:1A, 4A, 5A, 7.5A, 10A, 15A, 20A and 25A is
80% of their nominal rate.
Maximum load per circuit breaker rated 30A is 60% of its nominal rate.
