General information about safety and warranty
User Manual CWD2005 Plus
1. General information about safety and warranty
Strictly follow the Instruction for Use
Any use of the control unit requires full understanding and strict observation of this
instruction. The installation must be performed in the way as described in the instruction and
manual.
The warranty of the manufacturer does not cover failures or defects consequence of other or
inappropriate use of the product.
Maintenance
The analyzer must be inspected and serviced regularly by trained service personnel. Repair
of the analyzer may only be carried out by trained service personnel. It is recommended to
have a service contract obtained from the manufacturer for all repairs and maintenance.
When replacement parts are required ensure that you use only spare parts specified by the
manufacturer. Unauthorized parts and procedures can affect the analyzer’s performance,
place the operation of your process at risk and VOID YOUR WARRANTY. Look-alike
substitutions may result in fire, electrical/chemical hazards or improper operation.
Application in areas of explosion hazard
The analyzer was tested and developed for application in the areas where combustible or
explosive gas mixtures are lightly to occur.
Area classification:
Class 1, Div. 2 according NEC 500
Pressurization type: Z
Liability for proper function or damage
The liability for the proper function of the analyzer is irrevocable transferred to the owner or
operator to extend that the analyzer has been service or repaired by personnel not employed
or authorized by the manufacturer or when the analyzer was used in a manner not
conforming to its intended use.
The manufacturer cannot be held responsible for damage caused by non-compliance with
the recommendation above. Strictly follow the instructions for use. Any use of the analyzer
requires full understanding and strict observation of these instructions for use.
5
Содержание CWD2005 Plus
Страница 4: ...User Manual CWD2005 Plus 4 ...