3
1 Remote Control Basics
feature supported by your service.
For more information about the Menubar, see section
4 Menubar
.
INFO
displays the Infobar, a feature that lets you see information on what
you’re watching, what’s coming on next, and what’s on other channels.
For more information on the Infobar, see section
3 Infobar
.
EXIT
causes your set top box to exit whatever screen you are seeing
and return you to normal TV viewing. If you ever get lost on a screen, it is
always safe to press
EXIT
and then start over.
Programming You Remote Control
Your remote control can handle several devices. However, first you have to
set up your remote control for your equipment. To perform an automatic
code search, follow these steps:
Automatic Search
Automatic Search should only be undertaken if none of the brand codes
work or your brand name is not listed. To use the Automatic Search option,
follow these steps:
1. Switch on your device. Then press appropriate mode key, for example
if you want to set up a TV.
2. Press and hold
(
RCU SETUP
) until the mode key blinks twice.
3. Press
. The mode key blinks twice.
4. Aim the remote at the device and press
.
5. Press
/
repeatedly until the device is switched off.
6. Press
to turn the TV on.
7. Next, press
(
RCU SETUP
) to store the code for your device.
The mode key blinks twice. Your remote control is now programmed
to operate your TV set.
8. To search codes for other devices, repeat steps 1 through 7, but
substitute the
key with the appropriate one for the mode you are
searching for.
Содержание ADB 3721 WN
Страница 1: ...THE FUTURE NOW SHOWING Union Information System Digital TV ...
Страница 71: ...65 Notes ...